Carpenters pencil a carpenters pencil is flat to stop in rolling away
Marking guage a marking gauge is used to mark a piece of wood using a metal spike . you rest the edge of the wood on the wooden block that can be moved up and down the shaft to a custom length to scribe a line
Sliding bevel
A sliding bevel is used to mark a angle consistently it length can also be adjusted for different depths on the wood it is also known as a false square because duplicate angle with out the angles being at right angles
Combination square
A combination square is has a preset 90 and 45 degree square that slides up and down a ruler that can be used for marking depth and height to make sure something is level you can also you th spirt level
Engineers squarea engineers square , also known as a try square . the engineers square is used to mark a straight line perpendicular to the edge of the work this is used to make sure you work has a straight 90 angle
Tenon saw. a tenon saw is a back saw designed to rip the wood for cross grain cuts
vicea vice is used to hold you work in place so you can keep it still while being able to work on to the vices uses a screw to clamp the work together
Plane a plane removes a layer of wood to make it flat or to get the wood down to a desired thickness
great ammount of information on the first few but the photos are too big and get in the way of some of the writing.
ReplyDelete